Description of test targets[1] available at the ADP test facility

 

 

Target

Type

Number

Comments

GYATA-64

AP

75

  • Surrogates
  • The selection of the metal content for the mines was done as follows. The Minelab F1A4 detector was used with real mines in the same test area and a metal insert that gave a similar signal at pre-defined depths was selected for insertion inside the surrogate mines

Type 72

AP

75

PMN2

AP

13

  • Production mines rendered safe
  • They were rendered safe by taking out the percussion caps, which are a small part of the total metal content for these mines.

PMN

AP

13

Mo, Ko, Io

ITOP fuse inserts

?

  • For more info on ITOPs, see CWA 14747, Annex B: test targets

100Cr6 chrome steel balls of 5, 7, 10, 12, and 15mm diameter

CWA 14747 steel ball targets

?

  • For more info on the CWA 14747 steel ball targets, see CWA 14747, Paragraphs 5.6, 6.5, 8.2 and Annex B: test targets

Scrap fragments from local mine fields

  • Including fuses, bullets, barbered wire and typical mined-area fragmentation for the region (OZM series bounding fragmentation mines

 



[1] Description courtesy STEMD project, May 2005